CLOSED UV-C RADIATOR AND PHOTOCATALYTIC OXIDATION AIR DISINFECTANT
Designed for various types of premises
AirSteril Multiflex is an advanced air and surface disinfection solution designed for continuous use in rooms where people or animals are present . The device effectively destroys viruses, bacteria, fungus (mold) and unpleasant odors without causing health risks or disrupting daily activities.
How does it work?
The device uses enclosed UV-C radiation in combination with photocatalytic oxidation (TiO₂) . Air is drawn into the device, where pathogens are inactivated, and the purified air is returned back to the room. UV-C radiation does not enter the environment, making the system completely safe for 24/7 use .
Proven effectiveness
-
Research conducted in EU and Lithuanian laboratories shows that:
-
all airborne microorganisms , including coronaviruses, are inactivated within 10 minutes of being turned on;
-
The concentration of ozone produced is significantly lower than the limits set by Lithuanian hygiene standards.
-
-
As a result, the device can and must operate during the presence of people , ensuring constant protection of the premises.
Air and surface disinfection
-
Air disinfection: full cycle every ~10 min.
-
Surface disinfection: about ~1 hour after switching on.
If the device is operating continuously, surface disinfection occurs every hour , and air disinfection occurs continuously.
Important: the enclosed UV-C lamp installed in the standard AirSteril package is safe for use in rooms where there are people and animals - the device can operate continuously and without interrupting daily activities. It is also possible to purchase an additional, more aggressive lamp, which is designed for more intensive disinfection, but during its operation there must be no people or animals in the room. The AirSteril solution allows you to choose the most suitable mode according to your needs - from safe continuous air purification to more intensive disinfection.
Particularly effective against mold
Mold is one of the most resistant pathogens, especially in food industry premises. Practice shows that with the continuous operation of AirSteril systems in the premises, there are no conditions for mold to spread , therefore the problem is solved in the long term, not just temporarily.
TECHNICAL PRODUCT CHARACTERISTICS
| Device series | AirSteril Multiflex universal disinfector series |
| Category | Air disinfection/air purification devices |
| Product description | Closed UV radiation and photocatalytic oxidation air disinfectant for various types of premises |
| Usage | The device is placed or mounted on a wall or ceiling, plugged into a socket and operates 24/7 |
| Purpose | Disinfects the room when people are present. Continuous room disinfection, elimination of viruses, bacteria, mold, elimination of odors |
| Certificates | CE, RoHS |
| Power | 33W |
| Power supply | 220V, 50/60Hz |
| Dimensions | 430 x 130 x 100 mm |
| UV-C lamp power | 18W |
| UV-C lamp lifespan | > 8000 hours |
| UV-C lamp intensity | 15,000 μw/cm2 |
| Airflow speed | 34 cubic meters/hour |
| Air residence time in the device | > 0.5 seconds |
| TiO2 nanoparticle coated elements | 3 panels |
| Weight | 2.05 kg |
| Noise level | <39dB |
| Installation | Can be placed on a solid surface or mounted on a wall or ceiling, recommended at a height of 1.8-2.5 m |
| Material of manufacture | Aluminum and anodized aluminum |
| Power cord length | 1.8m |
| Exterior panel color | Silver |
| Front and back color | Black |
| Replacing the UV lamp | |
| ‣ After approximately 8000 hours of irradiation, the UV-C lamp will lose 20-30% of its power and will need to be replaced. | |
| changed | |
| ‣ replacement lamps can be purchased separately | |
| ‣ Replacement actions can be performed by the user, but the replacement instructions must be followed | |
| ‣ Disconnect the power supply | |
| ‣ Unscrew the screws and remove the outer panel | |
| ‣ Unscrew the lamp replacement nuts and carefully remove the used lamp | |
| ‣ Insert the new lamp and tighten the replacement nut. | |
| ‣ Do not touch the catalytic titanium plates during the process | |
| Maintenance and cleaning | |
| ‣ the device has no filters, so frequent maintenance is not required | |
| ‣ A vacuum cleaner or soft cloth/brush is suitable for cleaning both the outside and the inside | |
| ‣ Under no circumstances should the catalytic titanium plates be touched, they do not need to be cleaned | |
| ‣ If dirt appears on the surface of the lamp, use a dry cloth or alcohol solution to clean it. |
|
On business days, we ship all paid orders the same day.
All goods are stored and shipped from our partner warehouses, so we always ship safely and quickly.
We conveniently ship orders in Lithuania via VENIPAK courier service directly to your home or office www.venipak.lt 
DELIVERY TIME IS CALCULATED BY:
- At the moment of payment – when prepayment by bank transfer is selected;
- Order confirmation – when payment is selected in cash or by card, or via the PayPal system.
DURATION: You will receive your order within 1-2 business days after the goods are shipped. We will inform you about the shipment in a separate letter, and we will also send you the tracking number :)
DELIVERY TIME: Packages are delivered on weekdays between 8 am and 5 pm, so we recommend that you provide an address where you will be during the day, e.g. your work address.
SHIPPING PRICE:
FREE delivery from €55.00!
For purchases up to €54.99 - shipping via courier will cost €3.99
For purchases up to €54.99 - shipping to a parcel machine will cost €2.99
PICK UP GOODS AT THE POSTAL MACHINE :
You can pick up your package at the post office at any time of the day. We apologize for any inconvenience :)
VENIPAK POSTAL MACHINE. Parcel storage time 7 days.
We wish you happy shopping!
Most popular products for this product
More from All products
Recently viewed
